Fireplace Services in Johns Creek - Inspected First, Then Quoted in Writing

Fast, Reliable Fireplace Services Across Johns Creek

Fireplace service in Johns Creek typically runs $195-$450 per unit depending on whether you need a standard inspection, firebox repair, or full insert replacement, and most appointments are scheduled within a few business days. Our crews work Johns Creek regularly, from Medlock Bridge to St. Ives Country Club to Abbotts Bridge, and we carry common prefab parts on the truck because we’ve seen the same builder-installed units fail the same ways across entire subdivisions.

Call (470) 288-2763

We’re Emberly Chimney Cleaners, independently owned and operated under the Haven Standard since 2009. Dispatch and scheduling run from our Atlanta office, but our technicians live and work this corridor daily. If your home has multiple fireplaces - and many Johns Creek houses built between 1985 and 2005 do - we’ll inspect each flue system separately and give you a written price for every unit before any work starts. Call us at (470) 288-2763 or keep reading to see what your specific setup likely needs.

Why Emberly Chimney Cleaners Marietta Is Johns Creek’s Preferred Fireplace Services Company

We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in the Johns Creek area where prefabricated fireplaces from the 1990s and early 2000s are now hitting their end-of-service window. Our Fireplace Services team knows the difference between a Heatilator BC36 and a Lennox Merit series by the chase cap shape, and we stock refractory panels and door gaskets for the units that builders repeated across St. Ives and Medlock Bridge phases.

Our reviews from Johns Creek customers consistently mention two things: the camera footage we show them, and the written price they get before anyone touches a tool. Clause 1 of the Haven Standard requires it - “Have it in writing” - and we’ve never made an exception. Our technicians are background-checked, uniformed, and assigned by name; you’ll get a text when yours is on the way. Live phone support runs 24 hours a day, 7 days a week, so you’re not leaving a voicemail and hoping someone calls back.

Response time to Johns Creek is typically 2-4 business days for standard appointments, though we do keep slots open for situations where a failed firebox panel or stuck damper has left you without heat. We coordinate dispatch from our Atlanta office, but our crews are already in Forsyth and north Fulton counties most days of the week.

Our Fireplace Services in Johns Creek

Gas Fireplace Service

Gas fireplace service in Johns Creek runs $195-$295 for a standard inspection and burner cleaning, or $650-$1,200 if you need a new gas valve, pilot assembly, or log set replacement. Many Johns Creek homeowners converted from wood to gas in the 2010s, and those conversions are now 10-15 years old - valves get sticky, thermocouples drift, and the venting needs checking. We test gas pressure, inspect the vent termination for proper clearances, and document everything with photos. If your unit is a direct-vent insert in a former wood-burning chase, we pay special attention to the adapter collar and termination cap, which rust out faster in our humid summers.

Wood Burning Fireplace

Wood burning fireplace inspection and sweep in Johns Creek costs $225-$325 for a single flue, with firebox repair or panel replacement adding $180-$450 depending on the prefab model. True masonry fireplaces are rare here; what looks like brick or stone from the living room is almost always a metal zero-clearance box inside a decorative chase. We run the camera down the flue liner, check the smoke chamber for creosote buildup, and inspect the refractory panels for cracks or spalling. In Johns Creek’s mild-winter climate, Class I creosote is typical, but light use combined with damp summers can produce glazed deposits that standard brushing won’t remove.

Fireplace Insert

Fireplace insert installation in Johns Creek ranges from $2,800-$4,500 for a wood-burning insert with liner, or $3,200-$5,200 for a gas insert with direct venting, including removal of the existing prefab or retrofit of the chase. This is one of our most common Johns Creek jobs because so many 1990s prefab units are past their 20-30 year service life and can’t be repaired economically. We size the insert to your existing firebox, run a stainless liner or direct-vent system per manufacturer spec, and handle the hearth extension and surround. Materials come through our Haven buying network - we source from Olympia Chimney for liners and Gelco for caps - which keeps the price honest.

Damper Repair

Damper repair in Johns Creek costs $150-$350 for cleaning and resealing, or $400-$750 for a full top-sealing damper replacement if the original throat damper is rusted through. Johns Creek’s long humid summers are hard on dampers in lightly used fireplaces; the flue sits open, moisture accumulates, and the damper plate rusts to the frame. Chimney swifts nest in the gap, which makes the problem worse. We free the mechanism, check the seal with a smoke pencil, and replace the assembly if it’s beyond saving. A top-sealing damper from Famco, installed with a new cap, solves both the rust and the wildlife problem.

Firebox Repair

Firebox repair in Johns Creek runs $180-$450 for refractory panel replacement in a prefab unit, or $1,200-$2,800 if the metal firebox itself has rusted through and needs welding or replacement. This is where Johns Creek’s housing stock gets specific: builders in St. Ives, Medlock Bridge, and Abbotts Bridge installed the same prefab fireplace model across entire phases, so a failed refractory panel or deteriorated door gasket found in one home almost always predicts the identical failure in several neighbors’ units built the same year. We stock panels for the common Heatilator and Lennox units from that era, and we can usually match the part without a special order.

Fireplace Conversion

Fireplace conversion in Johns Creek - wood to gas, or gas to wood - ranges from $2,200-$4,800 depending on the existing chase, venting requirements, and whether the prefab unit can be adapted or must be removed. Gas-to-wood is less common but possible if the chase and flue are sized for solid fuel. We pull permits as required, run new gas lines or liner systems, and document the conversion for your insurer. Every conversion gets a full Level 2 inspection and photo record under Haven Standard Clause 4.

Before

After

Trusted Brands We Service in Johns Creek

We service and stock parts for Heatilator, Lennox, Superior, Majestic, and Monessen - the brands that dominate Johns Creek’s 1990s and early-2000s prefab installations. For repairs and replacements, we source materials through our Haven buying network: Olympia Chimney for stainless flue liners, Gelco for chase caps and termination assemblies, and Famco for dampers and hardware. Keeping these parts in stock locally means most Johns Creek jobs finish in one visit, not two. We don’t markup parts separately; the price we quote is the price you pay.

Common Fireplace Services Problems We See in Johns Creek Homes

• Prefab refractory panels cracked or spalling. The factory-built fireplaces in St. Ives and Medlock Bridge are now 20-40 years old, past their 20-30 year rated life. The refractory panels - the heat-resistant walls of the firebox - crack from thermal cycling and drop fragments into the ash pan. We replace these with OEM or compatible panels matched to your unit.
• Door gaskets failed, leaking conditioned air. The fiberglass rope gasket around the glass door compresses and hardens over 15-20 years. In Johns Creek, where HVAC runs nine months a year, a failed gasket leaks cooled or heated air up the flue and lets chimney swifts into the firebox. We install new gasket and adjust the door latch.
• Damper rusted shut or stuck open. Light fireplace use in our mild climate means dampers sit unused through long, humid summers. Rust welds the plate to the frame, or the pivot pin seizes. We disassemble, clean, lubricate, and test - or replace with a top-sealing damper if the throat assembly is too far gone.
• Chase crown and cap spalling from freeze-thaw. Johns Creek’s January and February cold snaps are brief but real. Water penetrates hairline cracks in the decorative masonry crown, freezes, and spalls off surface concrete. That water drips onto the prefab chase cover below, accelerating rust. We seal or rebuild crowns and replace rusted chase covers with stainless or galvanized units.

Pricing for Fireplace Services in Johns Creek, GA

We Also Serve Cities Near Johns Creek

Our crews work throughout north Fulton and Cobb counties, including Johns Creek and the surrounding communities of Marietta, Kennesaw, Sandy Springs, and Acworth. If you’re outside Johns Creek proper but in the service corridor, the same pricing, same Haven Standard guarantees, and same documented inspection process apply.

FAQs - Fireplace Services in Johns Creek

Our Johns Creek home was built in 1995 and has three fireplaces - how often do they each need service?
+

My neighbor in Medlock Bridge had a cracked firebox panel - should I check mine?
+

Do Johns Creek’s mild winters mean I can skip chimney service?
+

Can you convert my wood-burning prefab to gas or add an insert?
+

What’s the difference between a sweep and the inspection my prefab fireplace needs?
+