Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Caps & crowns
Masonry repair
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Marietta?
Chimney cap and crown work in Marietta, GA typically runs between $150 and $1,800 depending on whether you need a new cap, a crown repair, or a full crown replacement. Most Marietta homeowners pay somewhere in the $300-$700 range when the job is a standard stainless steel cap installation or a partial crown resurfacing. At Emberly Chimney Cleaners, every price is written down before a single tool comes off the truck – no surprises once work starts.
Chimney Cap & Crown Cost Breakdown (2026)
In the Marietta market, prices vary more than most homeowners expect – partly because of the wide range of chimney sizes across neighborhoods like Kennesaw Road corridors, the older brick homes near historic Marietta Square, and the taller two-story colonials in East Cobb. The table below reflects what we actually quote and charge in this market, not national averages pulled from a pricing database.
| Service | Typical Range (Marietta, 2026) | Notes |
|---|---|---|
| Chimney Cap – Galvanized Steel (single-flue) | $150 – $250 | Entry-level; adequate for moderate use, shorter lifespan |
| Chimney Cap – Stainless Steel (single-flue) | $200 – $375 | Most common install in Marietta; resists Georgia humidity well |
| Chimney Cap – Copper (single-flue) | $400 – $700 | Premium option; common in East Cobb and Kennesaw estates |
| Multi-flue Chimney Cap | $300 – $650 | Covers multiple flues under one chase-style top |
| Crown Repair / Resurfacing | $250 – $550 | Sealing hairline cracks and surface spalling |
| Full Crown Replacement | $600 – $1,200 | Demolition of failed crown and pour of new one; common in homes built before 2000 |
| Chase Cover (prefab fireplaces) | $250 – $550 | Replaces rusted metal chase tops on manufactured fireplace systems |
| Cap + Crown Repair (bundled) | $450 – $900 | Combined service reduces mobilization cost |
| Level 2 Camera Inspection (added to any job) | Included | Photo record delivered on every Emberly visit – Haven Standard Clause 4 |
What Pushes the Price Up
Three things move quotes toward the higher end in Marietta: chimney height, material choice, and the condition of what’s already up there. A standard one-story ranch in Marietta Heights is a straightforward ladder job. A three-story colonial in the Blackwell Road area where the chimney stack rises well above the roofline adds time, staging, and safety equipment. That labor difference alone can add $100-$200 to any service call.
Material is the other big driver. Stainless steel caps sourced through our supply partners – including Gelco, Famco, and Olympia Chimney – hold up better against Marietta’s summer humidity and the freeze-thaw cycles that hit in January and February than galvanized steel does. The price gap between galvanized and stainless is usually $50-$125, and the stainless cap routinely outlasts the galvanized version by a decade or more. That math is fairly simple.
Crown condition matters, too. A crown with tight hairline cracks can often be resurfaced with a flexible crown coat product – that’s a $250-$550 repair. But if the crown has failed structurally – if it’s shifted, broken into sections, or is holding standing water – resurfacing won’t stick. A full demolition and repour is the only fix, and that lands in the $600-$1,200 range depending on chimney size and access.
What Affects Chimney Cap & Crown Pricing in Marietta
- Chimney height and roof pitch: Marietta’s older neighborhoods – particularly around Whitlock Avenue and the Marietta Country Club area – feature steeper roof pitches and taller stacks. Taller access points require more setup time and sometimes additional safety rigging, which adds labor cost directly to the quote.
- Number of flues: A single-flue chimney is priced differently from a double or triple-flue system. Homes with two fireplaces or a fireplace-plus-furnace combination often have multiple flue openings, and each one needs its own cap or a custom multi-flue cover fabricated to the correct dimensions.
- Material selected: Galvanized, stainless, and copper each carry a different price point and a different service life. Georgia’s humidity accelerates rust on galvanized caps – we see this regularly in homes near Noonday Creek and in the wetter-feeling East Cobb microclimates. Stainless is the baseline we recommend for Marietta conditions. Copper is the premium choice and holds its finish for decades with no treatment.
- Crown damage severity: Surface cracks versus structural failure are two very different repair scopes. A NFPA 211 Level 2 camera inspection helps us tell the difference before quoting – a flashlight look from the roofline often misses the extent of internal freeze damage in a crown that looks intact from ten feet away.
- Existing mortar and liner condition: Sometimes a crown job reveals damaged flue tiles or deteriorated mortar joints right below the crown line. When that’s present, it gets documented in the photo record and quoted separately – it doesn’t get folded in quietly to inflate the bill, and it doesn’t get ignored.
- Chase cover vs. traditional crown: Homes with prefab or factory-built fireplaces have a metal chase instead of a masonry crown. Chase covers rust out faster than masonry crowns – we see a lot of replacement chase covers on the manufactured fireplace homes built in Marietta’s subdivisions during the 1990s building boom. Replacement covers are sized by the outside dimensions of the chase, so pricing is tied directly to the specific unit.
BeforeAfterWhy Marietta Chimneys Need Caps and Crowns More Than You Might Think
Marietta sits in Cobb County’s weather corridor where summer humidity runs high and winter temperatures regularly dip below freezing in January. That combination does predictable damage to masonry crowns. Water absorbs into the crown’s surface during wet fall and winter weather, then expands when temperatures drop overnight. Over several seasons, that freeze-thaw cycling fractures even well-poured crowns. A cap without a crown – or a crown without a cap – leaves the flue and the crown itself exposed to rain, pine pollen, animal entry, and accelerated spalling.
We’ve inspected chimneys in Marietta’s Eastside neighborhoods where the original cap blew off in a spring storm and sat unreported for a full season. By the time we got a camera down the flue, the liner joints were saturated and the crown had failed in two places. What started as a $200 cap replacement turned into a $1,400 repair scope – not because anyone was negligent, but because the damage that follows an open chimney top moves faster than most people expect.
A functioning cap keeps rain, animals, and debris out of the flue. The crown – the sloped mortar shelf that covers the top of the chimney masonry around the flue liner – directs water away from the flue opening and off the sides of the chimney stack. Both components work together, and the failure of either one accelerates wear on everything below it: the liner, the smoke chamber, and eventually the firebox itself. That’s why we photograph both on every visit under Haven Standard Clause 4, regardless of why we were originally called out.
For more detail on what’s included in a full service visit, see our Chimney Cap & Crown in Marietta service page.
How to Save on Chimney Cap & Crown in Marietta
Bundle cap and crown work in one visit
If your cap needs replacing and the crown has surface cracks, scheduling both in the same visit eliminates a second mobilization charge. That usually saves $75-$150 compared to two separate service calls. We quote both as a bundle with one written price – you see the full scope before any work starts.
Get a second opinion on any written estimate
If another company has already given you a written quote, bring it to us. We’ll review the scope, the materials specified, and the price – and give you a written comparison at no charge. This is a standing offer, not a promotional one. If their quote is fair for the scope described, we’ll say so. If it’s not, we’ll show you exactly where it diverges from what the job actually requires.
Choose the right material the first time
Galvanized caps are the cheapest upfront option, but in Marietta’s climate, they commonly rust out within 5-8 years. A stainless steel cap costs $50-$125 more at installation and typically lasts 15-25 years or more. The math on replacing a galvanized cap twice versus buying stainless once is not complicated. We source stainless caps through Gelco and Olympia Chimney specifically because the price point is honest for what you’re getting – not marked up to cover a showroom’s overhead.
Schedule before the problem gets bigger
Crown resurfacing – $250 to $550 in most Marietta cases – only works when the damage is surface-level. Once a crown has shifted or cracked through to the masonry below, a sealant coat won’t bond properly and the repair will fail within a season. The same job that costs $400 to resurface in October can cost $900 to replace in April after a winter of water intrusion. That’s not urgency theatre – it’s just the physics of masonry and water.
Ask about our written price before committing to anything
Every estimate at Emberly Chimney Cleaners is written down before work starts. The scope, the material, and the price are all on paper. That’s Haven Standard Clause 1 – not a sales tactic. If anything on the written quote needs clarification, Corrine Halstead’s team addresses it before the job begins, not after the crew is already on the roof. Call (470) 288-2763 to get a free estimate in writing.
FAQs – Chimney Cap & Crown Cost in Marietta
How much does a chimney cap cost in Marietta, GA?
A single-flue stainless steel cap in Marietta runs $200-$375 installed, which covers the cap itself and the labor to fit and secure it. Galvanized caps start around $150 but rust faster in Georgia’s humidity. Copper caps run $400-$700 and are common in East Cobb’s larger homes. Multi-flue caps covering two or more openings range from $300 to $650. Call (470) 288-2763 for a written quote specific to your chimney’s dimensions.
How much does chimney crown repair cost in Marietta?
Crown resurfacing – filling and sealing surface cracks with a flexible crown coat product – runs $250-$550 in Marietta depending on chimney size and how much prep work the surface needs. A full crown replacement, where the old failed crown is removed and a new one is poured, runs $600-$1,200. The difference between those two scopes comes down to whether the crown has failed structurally or just at the surface layer – a camera inspection from below and a close look from the roofline together can tell you which situation you’re in. Call (470) 288-2763 for a free written estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the damage is surface-level: $250-$550 versus $600-$1,200 for a replacement. But a repair on a structurally failed crown won’t last – the sealant will separate from the cracked base within a season. The determining factor is whether the crown’s core masonry is still intact. A Level 2 camera inspection documents what’s happening below the crown line, and a close visual inspection of the crown’s surface shows whether the cracks are cosmetic or structural. We photograph both and put the findings in writing before quoting either option. Call (470) 288-2763 for an assessment.
Can you install a chimney cap the same day in Marietta?
In most cases, yes. Standard single-flue and multi-flue stainless caps sized to common flue dimensions are stocked by our supply partners, and we carry common sizes on the truck. If your flue requires a custom-fabricated cap – which happens with non-standard tile dimensions found in some of Marietta’s older pre-1980 masonry chimneys – lead time is typically 3-5 business days for fabrication. The written quote will specify whether your cap is in-stock or custom-ordered so there are no surprises on the timeline. Call (470) 288-2763 to check availability for your address.
What is a chase cover and how much does it cost in Marietta?
A chase cover is the metal top on a prefab or factory-built fireplace system – it’s not masonry, so there’s no poured crown. It covers the top of the wood-framed chase that surrounds the factory fireplace unit. Chase covers in Marietta typically run $250-$550 installed, depending on the outside dimensions of your chase and the gauge of steel specified. We see a lot of rusted-out chase covers in Marietta’s 1990s subdivision homes – galvanized sheet metal was the standard at construction, and 25-30 years of Georgia weather takes its toll. A replacement in stainless or aluminum-coated steel will outlast the original by a significant margin. Call (470) 288-2763 for a written price on your specific chase dimensions.
Does Emberly Chimney Cleaners include an inspection when replacing a cap or crown?
Yes – a documented photo record is included on every visit under Haven Standard Clause 4. When we’re on the roof for a cap or crown job, we photograph the condition of the crown, cap seat, flue liner at the top, and any visible mortar joint deterioration. Those photos are part of your job record. If the camera goes down the flue – which is standard on any Level 2 inspection visit – the footage is documented and kept on file. You walk away knowing exactly what condition your chimney is in, not just what we replaced at the top. Call (470) 288-2763 to schedule a visit with a written price before any work starts.
What You Get When Emberly Does the Job
Corrine Halstead built Emberly Chimney Cleaners around one straightforward idea: show the customer what you found, show them what it costs, and show them what you did. Since 2009, that approach has meant a written price before any work starts on every one of the more than 38,000 chimneys we’ve inspected and cleaned. A cap and crown job is no different from a liner install or a full rebuild – the written quote, the photo record, and the 365-Day Done Right Promise apply the same way.
Background-checked, uniformed technicians are assigned by name before the visit, and you’ll get a text when they’re on the way. Live phone support is available 24 hours a day, 7 days a week – not a voicemail, not a web form. Materials are sourced through Haven’s buying network from suppliers including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, which keeps the price honest rather than padded to cover a retail markup.
If you’ve already got a written estimate from another company, bring it to us. A free second opinion on any written quote is a standing offer – no appointment required, no obligation to book. We’ll review the scope and tell you plainly whether it reflects what the job actually needs.
For a full overview of how we handle chimney cap and crown service – what’s included, how we assess crown condition, and what the photo record covers – the home page has the starting point for any chimney service question in Marietta.
Key Takeaways
- Chimney cap installation in Marietta runs $150-$700 depending on material and flue count.
- Crown repair (resurfacing) runs $250-$550; full crown replacement runs $600-$1,200.
- Stainless steel caps outperform galvanized in Marietta’s humidity – the price difference is $50-$125 and the lifespan difference is roughly a decade.
- Bundling a cap and crown repair in one visit saves a second mobilization fee.
- A written price before work starts is not a feature – it’s the baseline. Haven Standard Clause 1.
- Photo documentation of cap, crown, and liner condition is included on every Emberly visit under Haven Standard Clause 4.
- The 365-Day Done Right Promise backs every job: if it’s not done right, we make it right.
Get a Written Estimate for Your Marietta Chimney Cap or Crown
If your cap is missing, rusted, or undersized – or if you’ve noticed cracking or staining around the top of your chimney – call Emberly Chimney Cleaners at (470) 288-2763. A live person answers every call, every day. We’ll schedule a visit, put the price in writing before anyone starts work, photograph what we find, and back the result with the 365-Day Done Right Promise. Free estimates, no exceptions.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Marietta, serving Marietta, GA since 2009.
Pricing reflects the Marietta market as of 2026. Emberly Chimney Cleaners Marietta offers free estimates – call (470) 288-2763.
What Our Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.