A Emberly company - serving Marietta, GA

Level 2 Inspection in Marietta, GA

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection

Caps & crowns

Flue relining
Flue relining

Masonry repair

Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Level 2 Inspection in Marietta, GA

A Level 2 chimney inspection in Marietta, GA covers every accessible part of your chimney’s interior and exterior – flue liner, smoke chamber, firebox, crown, and exterior masonry – using a video camera scan that produces a documented photo record you keep. It’s the inspection standard defined by NFPA 211, and at Emberly Chimney Cleaners Marietta it’s what we’ve done on every single visit. If you have questions or want to schedule, call us at (470) 288-2763 – a live person answers, day or night.

Most annual sweep companies hand you a flashlight look and call it an inspection. We built our name around doing it differently. The “Level 2” in our name isn’t a marketing phrase – it’s the specific NFPA 211 inspection tier that requires camera documentation inside the flue, and it’s been our default practice since we completed our first job here in Marietta. Every report includes photos, a plain-language written summary of what the camera found, and a written price before any repair is discussed. That’s Clause 1 of the Haven Standard: have it in writing before anyone picks up a tool.

This page is part of our Chimney Sweep in Marietta service. If you’re here because you just bought a home in East Cobb, Kennesaw Road corridor, or the older neighborhoods around Marietta Square, keep reading – there’s specific information below that applies to the housing stock in those areas.

When You Need a Level 2 Inspection

NFPA 211 specifies that a Level 2 inspection is required any time there’s a change in use, after any event that may have damaged the chimney, or any time a property changes hands. In plain terms, that covers a lot of situations Marietta homeowners find themselves in.

  • You just bought the home. In Marietta’s market – especially the older Colonial and split-level homes built in the 1970s and 1980s around Walton Drive and Piedmont Road – sellers rarely have recent chimney documentation. A Level 2 inspection gives you a camera-documented baseline before the fireplace is ever used under your ownership.
  • You had a chimney fire, even a small one. Flue liner cracks from a chimney fire are not visible to the naked eye. A camera scan is the only reliable way to confirm the liner is still intact. This is non-negotiable from a safety standpoint – we always recommend a professional assessment, not a DIY look-up with a flashlight.
  • There’s been storm damage or a fallen tree. Marietta gets heavy weather off the ridge during late-spring thunderstorm season. A lightning strike, a downed limb, or a freeze-thaw winter (we do get them) can crack mortar joints, shift a chimney cap, or damage the flashing without any visible exterior sign. The camera tells you what the outside doesn’t show.
  • You’re switching fuel types or adding an insert. Converting a wood-burning fireplace to gas, or installing a wood stove insert in an older open hearth, changes the flue temperatures and the byproducts traveling through the liner. NFPA 211 requires a Level 2 inspection precisely for this scenario. The existing clay tile liner may not be rated for the new appliance’s output.
  • You see spalling, efflorescence, or staining on the exterior. Spalling – that’s when brick faces pop off or the mortar erodes and crumbles – often signals water penetration inside the flue. The exterior damage you can see is usually the trailing indicator; the interior damage came first. In Marietta’s humid summers, water intrusion accelerates fast once it starts.
  • Your home inspector flagged the chimney. Home inspectors are generalists. When one writes “recommend chimney evaluation by a qualified chimney professional,” that’s a direct referral for a Level 2 inspection with camera documentation – not a routine sweep.

Our Level 2 Inspection Process

Professional chimney sweep using a wire brush for chimney maintenance
Our Level 2 Inspection Process

Here’s exactly what happens when a Emberly Chimney Cleaners technician arrives at your Marietta home. No surprises, no scope creep, no decisions forced on the spot.

  1. Scheduled arrival with a text notification. We assign a named technician to your job and send a text when they’re on the way. Our technicians are background-checked and arrive in uniform – not a side-job crew in a personal truck. This is Haven Standard: Verified Crews and Arrive on Schedule.
  2. Exterior inspection first. The technician walks the roofline and inspects the chimney crown (the concrete or mortar cap that covers the top of the chimney stack), the flashing where the chimney meets the roof, the chimney cap or spark arrestor, and the exterior masonry. On two-story homes common in East Cobb, this includes checking for any cricket – that’s a small peaked structure built behind the chimney on the high side of the roof to deflect water – and confirming it’s intact. Cracks in the crown and failed flashing are among the most common findings we document in Marietta.
  3. Interior firebox and smoke chamber inspection. Inside the home, the tech examines the firebox (the chamber where the fire actually burns), the damper, and the smoke chamber – the transitional area between the firebox and the flue. We look at the firebox liner for cracks or spalling, check that the damper seals properly, and assess the smoke chamber’s parge coat (the smooth mortar coating that’s supposed to cover the interior walls). A rough or deteriorated smoke chamber is one of the leading causes of poor draft in Marietta homes, and it’s a repair category where HeatShield resurfacing is frequently the right answer.
  4. Camera scan of the full flue length. This is what separates a Level 2 from a Level 1. A camera travels the full length of the flue liner – from firebox to cap – recording video and capturing still photos of the liner’s condition at multiple points. We’re looking for liner cracks, offset joints, mortar deterioration, blockages, evidence of past chimney fires, and any points where the liner has failed or is missing entirely. Many of the clay tile liners installed in Marietta homes built before 1990 are now 35 to 50 years old; some are near the end of their serviceable life. The camera doesn’t guess – it shows.
  5. Written report with photos delivered the same day. Under Haven Standard Clause 4, a documented photo record is included on every visit – not sold as an add-on, not emailed two weeks later. The report names what was found in plain terms: liner condition, creosote classification (Class I light deposit, Class II tar-like buildup, or Class III hardened glaze), any structural findings, and whether any immediate safety concern exists. If we find Class III creosote – the hardened, highly flammable form that bonds to the liner wall – we say so plainly and explain why it needs to be addressed before the fireplace is used.
  6. Written price before any repair is discussed further. If the inspection reveals work that should be done – a liner replacement, crown repair, HeatShield smoke chamber resurfacing, a new Olympia Chimney cap – you receive a written price and written scope before we ask you for a decision. Haven Standard Clause 1 means no verbal estimates, no “we’ll figure out the price when we’re done.” If you want a second opinion, bring us a competitor’s written quote – our Free Second Opinion offer applies to any written estimate you’ve received.
BeforeBefore
AfterAfter

Level 2 Inspection Pricing in Marietta

A Level 2 chimney inspection in Marietta typically runs $199 to $349 for a standard single-flue fireplace; see our full guide on how much does chimney sweep cost for Marietta, GA. Multi-flue systems – common in older Marietta homes that have both a fireplace and a furnace or water heater venting through the same chimney stack – run $299 to $499 depending on the number of flues and total liner length.

What moves the price within that range:

  • Number of flues. Each flue requires a separate camera scan. A home with two fireplaces venting through separate flues, or a fireplace flue and an appliance flue in the same chase, takes more time and produces more documentation.
  • Chimney height and access. Taller chimneys – more common on the larger Colonial and Tudor-style homes in the Marietta Square neighborhoods and the Whitlock Avenue corridor – require longer camera equipment and more time on the roof.
  • Debris or blockage found during the scan. If the camera finds an active bird or animal nest (common in uncapped chimneys throughout Cobb County), removal is priced separately and quoted in writing before we proceed.
  • Inspection only vs. inspection with sweep. If a cleaning is needed on the same visit, that’s quoted and priced separately – you’ll see both line items before either begins. Many customers schedule both together; some need the inspection report first for insurance or real estate purposes and handle the sweep separately.

There is no “call for a quote” here. Every price is written before work starts. Call (470) 288-2763 and we’ll give you the price range for your specific setup on the call – and a written quote before the tech ever walks in your door.

FAQs – Level 2 Inspection in Marietta

Professional chimney sweep cleaning a fireplace flue from the rooftop
FAQs – Level 2 Inspection in Marietta

What is a Level 2 chimney inspection and how is it different from a Level 1?

A Level 2 chimney inspection includes a video camera scan of the full flue liner interior, in addition to the exterior and accessible interior areas covered by a Level 1. A Level 1 is a visual check of accessible areas – no camera, no documentation of the liner’s internal condition. Level 2 is required by NFPA 211 when a home changes ownership, after any event that may have damaged the chimney, or when the type of appliance or fuel changes. At Emberly Chimney Cleaners Marietta, the camera scan and documented photo record are standard on every inspection – not an upgrade. Call (470) 288-2763 to schedule; estimates are free and delivered in writing before any work begins.

How much does a Level 2 inspection cost in Marietta?

A Level 2 inspection in Marietta runs $199 to $349 for a single-flue system, and $299 to $499 for multi-flue chimneys. The price on your written quote depends on the number of flues, chimney height, and access conditions. There are no verbal estimates and no “we’ll see when we get there” pricing – you’ll have a written price before the inspection starts. Call (470) 288-2763 and we’ll confirm the range for your home on the first call.

Do I need a Level 2 inspection when buying a home in Marietta?

Yes – NFPA 211 specifies a Level 2 inspection any time a property changes hands, and for good reason. In Marietta, a large share of resale homes were built in the 1970s and 1980s with clay tile flue liners that are now four to five decades old. A standard home inspector cannot assess liner condition without a camera. We regularly find cracked liner sections, failed crowns, and Class II or Class III creosote deposits in homes whose sellers haven’t used the fireplace in years – which doesn’t mean the chimney is clean, it means the soot removal and deterioration went undetected longer. If your real estate contract or home inspector report references the chimney, call (470) 288-2763 and we’ll get a documented inspection scheduled before closing if timing allows.

How long does a Level 2 inspection take?

For a single-flue fireplace in a typical Marietta home, plan on 60 to 90 minutes. Multi-flue systems or homes with particularly tall chimney stacks take 90 minutes to two hours. The camera scan itself is thorough – we’re reviewing footage at multiple points, not fast-forwarding past anything – and the written report is prepared and delivered before the technician leaves your home. If the inspection reveals needed repairs and you want to discuss options, that conversation happens on the same visit with pricing in hand. Call (470) 288-2763 to get scheduled; we’ll give you a specific arrival window, not a four-hour block.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Why Emberly Chimney Cleaners Marietta for Your Level 2 Inspection

We’ve completed more than 38,000 chimney inspections and cleanings. Every one of them came with a written price before work started and a documented photo record when it was done. That isn’t a recent improvement – it’s the practice we built the company on, years before insurance companies and home inspectors started routinely asking for camera documentation.

The Done Right Promise backs every inspection and every repair – if it’s not right, we make it right, period.

We source materials from suppliers including Olympia Chimney and Gelco when cap or hardware replacements come up, and HeatShield when smoke chamber resurfacing is the right repair. The pricing you see reflects what those materials actually cost through our supplier network – not a markup designed to pad a job that didn’t need the work in the first place.

If you’ve gotten a written estimate from another company and something doesn’t add up, bring it to us. Our Free Second Opinion offer applies to any written quote, no strings attached.

For the full picture of what we do beyond inspections, visit our home page or start with our core service overview at Chimney Sweep in Marietta.

Key Takeaways

  • A Level 2 inspection in Marietta runs $199-$349 (single flue) or $299-$499 (multi-flue), written price before work starts.
  • NFPA 211 requires a Level 2 any time a home changes hands, after a chimney event, or when fuel type or appliance changes.
  • The inspection includes a full camera scan of the flue liner, exterior and interior visual inspection, and a documented photo report – all delivered the same day.
  • High-tension components like chimney springs and cables aside, no part of a chimney inspection should be attempted as a DIY exercise when the liner’s structural integrity is in question – camera documentation by a trained tech is the only reliable method.
  • Every inspection is backed by the Done Right Promise. If something isn’t right, we fix it.
  • Live phone support at (470) 288-2763, answered by a real person around the clock.

Schedule Your Level 2 Inspection in Marietta Today

professional chimney sweep service
Schedule Your Level 2 Inspection in Marietta Today

If you’re buying a home, recovering from a storm, or simply don’t have a documented record of your chimney’s current condition, a Level 2 inspection is the right starting point. Call (470) 288-2763 to get a written quote and schedule a time that works for you. A live person will answer, give you a price range on the call, and confirm a specific arrival window – not a vague four-hour block. The written quote follows before the tech ever steps inside.

Written by the team at Emberly Chimney Cleaners Marietta.

Need Chimney Cleaning help in Marietta? Licensed & insured · Written inspection reports response · free estimates
Call (470) 288-2763
Local Service Coverage

Request a Free Estimate in Marietta

Tell us what you need - Emberly Chimney Cleaners Marietta responds fast. No obligation.

By clicking submit, you acknowledge our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Us
Call Now - 24/7 Dispatch